| Step |
Action |
| 1. |
Open Internet (press the blue Internet button
– you may need to close some screens.) |
| 2. |
Select Settings. |
| 3. |
Scroll to Internet Access and select Change. |
| 4. |
Select New. |
| 5. |
Fill your parameters as shown below:
Provider Name: GPRS
Phone Number:
User Name:
Prompt Password: No
Password: |
| 6. |
Open Advanced Settings: |
| 7. |
Fill your parameters as shown below:
Modem Initialisation:
Login Customisation: None
PPP Compression: On
IP Address:10.76.101.51
Default Gateway:
Network Mask:
Primary Nameserver:
Secondary Nameserver: |
| 8. |
Press close three times and return to the beginning
Internet screen by pressing the Internet key. |
| 9. |
Scroll to WAP Services and press Select. |
| 10. |
Press Settings, highlight Access Point and press
Change. |
| 11. |
Highlight GPRS entry and select Edit. |
| 12. |
Fill your parameters as shown below:
Access Point Name:utwap
Homepage:www.utl.co.ug
Phone Number:
User Name:
Prompt Password: No
Password:
Gateway IP Address: 10.76.101.51
Data Call Type: ISDN
Data Call Speed: 9600 |
| 13. |
Select Close twice. |
| 14. |
Insure that GPRS is selected as the Default Access
Point. |
| 15. |
Press Close again. |
| 16. |
Now you have setup the browser – to test
select Home. |
| 17. |
To finish WAP session press Close, then Disconnect.
|
| |
|
| |
WEB settings for Nokia 9110
|
| 1. |
Open Internet (press the blue Internet button
– you may need to close some screens.) |
| 2. |
Select Settings. |
| 3. |
Scroll to Internet Access and select Change. |
| 4. |
Select New. |
| 5. |
Fill your parameters as shown below:
Phone Number:
User Name:
Prompt Password: No
Password: |
| 6. |
Open Advanced Settings: |
| 7. |
Fill your parameters as shown below:
Modem Initialisation:
Login Customisation: None
PPP Compression: On
IP Address:10.76.101.51
Default Gateway:
Network Mask:
Primary Nameserver:
Secondary Nameserver: |
| 8. |
Press close three times and return to the beginning
Internet screen by pressing the Internet key. |
| 9. |
Scroll to WAP Services and press Select. |
| 10. |
Press Settings, highlight Access Point and press
Change. |
| 11. |
Highlight GPRS entry and select Edit. |
| 12. |
Fill your parameters as shown below:
Access Point Name:utweb
Homepage:www.utl.co.ug
Phone Number:
User Name:
Prompt Password: No
Password:
Gateway IP Address: 10.76.101.51
Data Call Type: ISDN
Data Call Speed: 9600 |
| 13. |
Select Close twice. |
| 14. |
Insure that GPRS is selected as the Default Access
Point. |
| 15. |
Press Close again. |
| 16. |
Now you have setup the browser – to test
select Home.
To finish WAP session press Close, then Disconnect. |
